Controls

The fixture embedded nLight® AIR network interface called the rIO is a low voltage wireless device providing individual fixture control and digital dimming capabilities within Acuity Brands® LED luminaires with eldoLED® brand drivers. This smart device results in the luminaire being “nLight AIR-enabled” — making it both addressable as well as capable of digitally communicating with other nLight AIR wireless controls such as occupancy sensors, photocells, and wall switches. This allows for advanced operation and design flexibility ranging from stand-alone rooms to building and campus-wide networks.

As part of the nLight AIR wireless controls family, the rIO uses a 900MHz communication frequency that easily penetrates obstructions and its five-tier security architecture helps building owners and occupants rest easy.

The MP20 mini power pack transforms 120, 240 or 277 Volts to Class II 15 VDC to power the remote sensors. Although Plenum Rated, the elongated mounting nipple allows for the MP20 to be mounted either directly through a 1/2 inch knockout in a junction box or to be located inside an adjacent box for specific local code requirements.

Up to 14 sensors may be connected to one MP20. Multi-circuit control can be handled by multiple MP20 mini power packs or MSP20 slave packs. MP20 can be wired continuously hot (line side) or on the switch leg (load side) without nuisance delays upon turn-on.

Pathway Connectivity has an emergency lighting solution for anywhere DMX lighting is used. The DMeXit Emergency Controller fulfills the need for a code compliant, UL924 listed solution for venues that use theatrical and dynamic lighting that is required to go to a specific level in emergency situations.

The DMeXit is triggered in an emergency by an external contact closure or by a lack of incoming DMX. Emergency mode triggers a fully customizable single universe of DMX from four isolated RDM compliant outputs. An Integrated Phase Loss Detection device can be factory installed within the enclosure.

Networked lighting controls reduces energy costs, aids in building code compliance, occupant comfort and much more. nLight® is a lighting controls solution that is easy to specify, install, and use that grows with the pace of your business today and tomorrow.