[pull] master from coolsnowwolf:master#1
Open
pull[bot] wants to merge 4670 commits intouian:masterfrom
Open
Conversation
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
7e4a717 to
effbf66
Compare
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
6744cba to
761b79a
Compare
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
d56c1de to
cfea6db
Compare
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
2f4230c to
a4956e5
Compare
aiamadeus
force-pushed
the
master
branch
4 times, most recently
from
e59e806 to
2843c0b
Compare
aiamadeus
force-pushed
the
master
branch
3 times, most recently
from
4bb8b87 to
801b8fd
Compare
Hardware specifications
-------------
- SoC : Qualcomm IPQ4028
- RAM : 256 MiB DDR3
- Flash : 32 MiB SPI NOR(MX25L25635E) + 128 MiB SPI NAND(GD5F1GQ4XC)
- WLAN : IPQ4018 built-in
- 2.4 GHz : 2x2 MIMO WiFi4
- 5 GHz : 2x2 MIMO WiFi5
- Ethernet : QCA8075 10/100/1000 Mbps 1x WAN,4x LAN
- USB : 1x 2.0,1x 3.0
- JTAG : 1x 20 pins
- UART : 1x 12 pins port, 115200n8
┌─────────────────────────────────────────────────┐
│ 12-PIN UART CONSOLE │
│ ● used ○ unused │
├─────────────────────────────────────────────────┤
│ ┌─────┐ │
│ Pin 1 ○──┤1 12├──○ Pin 12 │
│ Pin 2 ●──┤2 11├──○ Pin 11 │
│ Pin 3 ○──┤3 10├──○ Pin 10 │
│ Pin 4 ○──┤4 9├──○ Pin 9 │
│ Pin 5 ●──┤5 8├──○ Pin 8 │
│ Pin 6 ●──┤6 7├──○ Pin 7 │
│ └─────┘ │
├─────────────────────────────────────────────────┤
│ Used pins:Pin 2 (RXD), Pin 5 (TXD), Pin 6 (GND)│
│ Unused pins: 1,3,4,7,8,9,10,11,12 │
└─────────────────────────────────────────────────┘
- Buttons : 1x Reset
- LEDs : 1x Power (R/G/B) red/power,green/wan-link,blue/usb
1x WiFi 2.4 GHz (blue)
1x WiFi 5 GHz (blue)
Flash instructions
-------------
1. Connect to the router via the serial port (UART).
2. Interrupt the boot process by pressing any key when prompted
in U-Boot.
3. Download the initramfs image, rename it to initramfs.itb
and host it on a TFTP server.
4. Run the following commands in U-Boot:
"tftpboot initramfs.itb && bootm"
5. After OpenWrt boots up, use SCP or LuCI to upload the
sysupgrade.bin file to complete the upgrade.
Signed-off-by: Willem Lee <1980490718@qq.com>
Add support for Airoha EN7581/AN7583 NPU variant firmware present in linux-firmware. The Airoha EN7581 NPU variant is to support devices equipped with the MT7996 WiFi chip. While at it also add an extra new line to follow pattern of double new line to separate each firmware package. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Airoha AN7581 SoC supports a Network Processor (NPU) to offload WiFi traffic. Add the required bits to enable the support of it in the MT76 driver. This will be enabled by default if we are compiling for the Airoha AN7581 SoC. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> [ improve commit title/description ] Link: openwrt/openwrt#20826 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Hardware specification: SoC: MediaTek MT7987A 4x A53 Flash: 512 MB SPI-NAND RAM: 512MB DDR4 Ethernet: 2x 2.5GbE (built-in + RTL8221B) WiFi: MediaTek MT7990 USB: 1x USB 3.0 port Button: Mode, Reset Power: Type-C PD 5/9/12V Flash instructions: 1. Power on the device with 'reset' key pressed for 5s 2. Set static IP on your PC: IP 192.168.1.10/24, GW 192.168.1.1 3. Visit http://192.168.1.1 and upload sysupgrade.bin
a665659dee50 wifi: mt76: fix beacon monitor for MBSSID nontransmitted BSS 1b26f5f63d42 wifi: mt76: mt7996: Decrement sta counter removing the link in mt7996_mac_reset_sta_iter() 0c1dedac48c3 wifi: mt76: mt7996: Switch deflink to seclink only if link lookup does not fail 7fa21be01b97 wifi: mt76: mt7996: Rely on msta_link link_id in mt7996_vif_link_remove() 492a407111c3 wifi: mt76: mt7996: Account active links in valid_links fields ade83e44eda0 wifi: mt76: mt7996: Move mlink deallocation in mt7996_vif_link_remove() efebeea5c058 wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface() a4c790aef40d wifi: mt76: mt7996: Add mcu APIs to enable/disable vif links. 018f60316d4d wifi: mt76: mt7996: Destroy active sta links in mt7996_mac_sta_remove()
Replace the deprecated EXTRA_CFLAGS with ccflags-y so that the -DCONFIG_MT76_LEDS define is applied correctly by the kernel build system. EXTRA_CFLAGS is no longer honored by recent kbuilds[1]; ccflags-y is the supported variable and works on kernels 6.12 and 6.18. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.18.20&id=f77bf01425b11947eeb3b5b54685212c302741b8
f5dd57a84cc3 nl80211: fix 5Ghz frequency calculations
CONFIG_TOOLS_SUPPORT_RELR is set during runtime by the kernel so it should not end up in our static configs. So, filter it out by default. Signed-off-by: Robert Marko <robimarko@gmail.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot] (v2.0.0-alpha.4)
Can you help keep this open source service alive? 💖 Please sponsor : )