This repository contains Vagrantfile which is responsible for setting up initial state of the Dev VM.

Please refer to the Installation guide to install Spryker.

The VM will start with the default configuration for project demoshop and IP 10.10.0.33. If you would like to change project name, you need to edit Vagrantfile and change value of variable VM_PROJECT (ie. to demoshop, project) and VM_IP - last digit. The IP address must be unique, so each VM on your workstation must have unique IP address. The generated hostnames will be using value of VM_PROJECT, so by default the hostnames will be:

www.de.demoshop.local
zed.de.demoshop.local
static.demoshop.local
www-test.de.demoshop.local
zed-test.de.demoshop.local
static-test.demoshop.local

The PHP module xdebug are pre-installed on the DevVM, but not enabled by default. To enable it, use the following commands:

# Enable XDebug
sudo -i bash -c "phpenmod -v 7.0 -s cli -m xdebug; phpenmod -v 7.0 -s fpm -m xdebug; service php7.0-fpm restart"

# Disable XDebug
sudo -i bash -c "phpdismod -v 7.0 -s cli -m xdebug; phpdismod -v 7.0 -s fpm -m xdebug; service php7.0-fpm restart"