App examples - UI functions do not work

[sebgeekinside]

I have tested the 3 app examples given from this github.
None of them succeed in display text or draw figures.

Running krate monitor, I can see serial log that prove that the firmware.bin file is correctly updated, just after the Kublet is restarting and the app is running (I can check the log message from the setup() and loop() functions).

From the mobile app, I have also tested de Server app (i.e. Standard server with preset UIs).
The values sent via URL are correctly displayed.
It would be helpful to have de source code of this app to see how display works and also how to use the button (TOUCH_CS?).

Why the display from the mobile app is ok but all the displays from the app examples from the github do not work?

[BStrauss3]

Concur - in fact we should have the source code for the four standard apps - remove an API key if you need to, but more examples are always better.

[sebgeekinside]

I have tested the 3 app examples given from this github.
None of them succeed in display text or draw figures.
I succeed in use the ui.drawText function.
Displays only work using the krate command to build the firmware.bin file.

It would be helpful to have de source code of the app available via the mobile app to see how to use the button of the Kublet (TOUCH_CS?).

[lordscarlet]

Anything with boredapi doesn't work because boredapi is down.

…

On Sun, Jul 21, 2024, 1:35 PM sebgeekinside ***@***.***> wrote: I have tested the 3 app examples given from this github. None of them succeed in display text or draw figures. I succeed in use the ui.drawText function. Displays only work using the krate command to build the firmware.bin file. It would be helpful to have de source code of the app available via the mobile app to see how to use the button of the Kublet (TOUCH_CS?). — Reply to this email directly, view it on GitHub <#7 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAAEMH4R7PHX3KJP62DWY63ZNPWOVAVCNFSM6AAAAABLF7MDISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBRG4ZDCOBXHA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[audreylim]

Concur - in fact we should have the source code for the four standard apps - remove an API key if you need to, but more examples are always better.

We will upload a full app soon. Unfortunately we are a little stretched right now :(

Can we get the hello app working on your devices first?

Upload developer app to kublet. Then,

cd community/apps/hello
krate build 
krate send ip-address

Once this works we can start calling APIs - we will upload working examples then.

Feel free to join our Discord server https://discord.gg/hpxFXchr - it's easier to debug issues there.

[audreylim]

We just updated the hello code so please do a git pull origin main first.

[sebgeekinside]

Can we get the hello app working on your devices first?

I succeed in run the hello app and it works fine.
For that, it is mandatory to build the app using krate build via a PlatformIO Terminal (VS-Code) and not the build command of PlatformIO.