This project adds a basic high availability layer to InfluxDB.

NOTE: influx-proxy must be built with Go 1.7+, don't implement udp.

We used InfluxDB Relay before, but it doesn't support some demands. We use grafana for visualizing time series data, so we need add datasource for grafana. We need change the datasource config when influxdb is down. We need transfer data across idc, but Relay doesn't support gzip. It's inconvenient to analyse data with connecting different influxdb. Therefore, we made InfluxDB Proxy.

• Support gzip.
• Support query.
• Filter some dangerous influxql.
• Transparent for client, like cluster for client.
• Cache data to file when write failed, then rewrite.

• Golang >= 1.7

$ # Install influx-proxy to your $GOPATH/bin
$ go get -u github.com/chengshiwen/influx-proxy/service
$ go install github.com/chengshiwen/influx-proxy/service
$ mv $GOPATH/bin/service $GOPATH/bin/influx-proxy
$ # Start influx-proxy!
$ $GOPATH/bin/influx-proxy -config proxy.json

The architecture is fairly simple, one InfluxDB Proxy process and two or more InfluxDB processes. The Proxy should point HTTP requests with measurements to the two InfluxDB servers.

The setup should look like this:

        ┌─────────────────┐
        │writes & queries │
        └─────────────────┘
                 │
                 ▼
         ┌───────────────┐
         │               │
         │InfluxDB Proxy │
         |  (only http)  |
         │               │
         └───────────────┘
                 │
                 ▼
        ┌─────────────────┐
        │   measurements  │
        └─────────────────┘
          |              |
        ┌─┼──────────────┘
        │ └──────────────┐
        ▼                ▼
  ┌──────────┐      ┌──────────┐
  │          │      │          │
  │ InfluxDB │      │ InfluxDB │
  │          │      │          │
  └──────────┘      └──────────┘

measurements match principle:

• Exact match first. For instance, we use cpu.load for measurement's name. The KEYMAPS has cpu and cpu.load keys. It will use the cpu.load corresponding backends.

• Then Prefix match. For instance, we use cpu.load for measurement's name. The KEYMAPS only has cpu key. It will use the cpu corresponding backends.

The following commands are forbid.

• GRANT
• REVOKE

Only support match the following commands.

• .* from .*
• drop measurement
• show measurements
• show series
• show measurements
• show tag keys
• show tag values
• show field keys
• show retention policies

MIT.