Eliminate Lags and Throttling — Run Your Game Smoothly and Comfortably with No Substantial Performance Drops

• This will improve overall performance but in exchange for a bit increased power usage and may cause heating
• Some kernels may experience nerfbreak, freezing and/or lagginess due to incompatibilities
• Flash at your own risk, I'm not responsible for lost data or bricked devices

• Download and install the module
• Reboot after you finished installing

• Changing modes can be done without having to reboot just edit the mode.txt file to the mode you want

MODE
  0 = Adaptive Mode (Default)
      Dynamically changing through usage (Recommended)
  1 = Powesave Mode
      Lowering power draw by 20% to give more SOT
  2 = Balanced Mode
      Balancing power draw and performance stability
  3 = Performance Mode
      Removed throttle to maximize phone capability
  4 = Gaming Mode
      Better RAM maximization and set device at max performance with no throttling

• There are also modes that cannot be changed and automatically runs when certain conditions met like:

Sleep Mode = Pauses MAGNETAR processes when phone are turned off
           and continue processes when it was turned on             
Cooldown Mode = Automatically set to lower profile to avoid overheating
           when temp reached above 45°C           
Ultra Powersave Mode = Lowering power draw to avoid draining below
           10% batt capacity          
Charge Mode = Automatically set to lower profile to avoid excess heating
            when phone is being used while charging

• Changes logging style according to user preferences

LOG_MODE
  0 = Disable
      Disable module during boot
      (Need to reboot to reactivate)
  1 = Normal (Default)
      Refresh log every 180 seconds
  2 = Aggressive
      Refresh log every 10 seconds but uses more cpu power
  3 = Sush
      Silence module logging but module continuously runs at background 
      (Need reboot to unsilence)

• There's also a log trimmer that is available to change

TRIM
  Default 'N' value is 100
    — Delete last 'N' log thread to avoid log spam
      'N' can be any number

• Compiled w/ GCC 9
  • LTO & O3 Optimization Enabled
• All Tweaks Updated
• Bug Fixes
  • Fixed Folder Issue
  • Fixed Random Reboot
  • More...
• Added Doze Optimization
• Added Logging Switch
  • 0 = Disable Logging
  • 1 = Normal Logging
  • 2 = Aggressive Logging
  • 3 = Sush Logging
• Added Log Trimmer
  • Trim Logs Per Thread Count
• Added Game Mode (MODE 4)
  • Bypass Temp Limit
  • Better Ram Management For Gaming
  • Optimized Performance
  • Shows Current CPU/GPU/RAM Stats
• Added Ultra Powersave
  • Activated When Batt is Lower Than 10%
• Added Charge Mode
  • Activated When Charging
• Renamed Idle Mode to Powersave Mode
• Renamed Moderate Mode to Balanced Mode
• Disabled Module Detection
  • Run when Conflicting Module was Disabled
• Improved CPU and GPU Tuning
• Improved Adaptive and Sleep Mode
• Improved Mode Switching
• Improved Powesave Mode
  • 20% Less Power Draw
  • Improved SOT
• Improved Balanced Mode
  • 10% Less Power Draw
• Updated Conflict Library
• Stability Improvements

• Hotfix
  • Fixed Stucked Module
• A Bit Faster Module Logging

• Introduction of Modes
  • Adaptive
  • Idle
  • Moderate
  • Performance
  • Cooldown – Triggered when Temp Hits 45°C
  • Sleep – Triggered when Screen was Turned OFF
• Mode Switch Made Easy
  • Can Be Done WITHOUT REBOOTING
  • See Instructions
• Support For All SOC
  • 32bit and 64bit
• Anti-Blocking Parameters Added
  • Unique ID For Each Installation
• Updated GPU Tweaks
• Fixed Missing Folder on Android 10
• API Support From As Low As Android 5
• Removed Unnecessary Script
• Various Bug Fixes & Improvements

• Various Important Bug Fix

• Fixed After-Reboot-Execution

• Fixed .MAGNE.BIN Path Detection

• Anti-Kang Parameters
• Fully Rewritten For Efficiency
• Not Forcing Config To Avoid Conflicts
• Force High Quality Graphics
• Added RAM Gaming Configuration
• Adjusted Kernel Gaming Config
• Removed Governor Config For CPU & GPU
• Fixed Lag When Certain Temp Reached
• Much Better Temps
• Removed SoundFX
• Updated Props
• Compiled With Clang
  • 32bit and 64bit SOC Support
• All New Logging System
  • Detailed Logging
• Improved SOC Detection
  • Fixed Recovery Installation
• Smoother UI
  • FPS Unlocking
  • Auto Freq
• Reduced Idle Drain
  • Adjusted LPM Parameters
  • Disabled Debuggers
• EAS / HMP Tuning
• Better Color Adjustment
• More...

• Various Adjustments
• Smoother Performance
• Added SD855 Support
• Added SoundFX Opt-in/out
• Added More GPU/CPU Tweaks
• Fixed Wifi Issues On Some Devices
• Fixed Static Call Sound
• Fixed Scroll Bug
• Fixed Module Logging Duplicate
• Updated Thermal
• Better Idling
  • Reduced Heating
  • Lower Batt Consumption
• Updated Props
  • Removed Various Props
  • Reverted Some Props from Build 1909101057
• Smart Fast Charge
  • Lowering Charge Input When Battery Temp Reached 45°C
• Improved Log Checking
• Increased Override Time To 3mins After Boot

• Support for All Devices Using QComm Snapdragon SOC
• Improved System Speed
• Improved App Launch Speed
• Improved IPV4 Traffic
• Improved Module Logging
• Better Temperature
• Lower Battery Consumption
• Adjusted KCAL Values
• Updated Props
• Cleanup and Optimizations

• Performance Improvements
• Proper Android 10 Support
• Updated Props
• Extended Min API to 25
• Added More Devices to Run Service Script
• Added Thermal Bin to Entry-Level SOC
• Adjusted Tweaking Values
• Improved Module Logging
• Sound Mod Will Only Be Installed on AOSP Based Android 9 Rom (Device Specific)

• Performance Improvements
• Adjusted Some Tweaking Values
• Fixed Some Settings That Didn't Get Applied
• Added Thermals On Flagship SOC
• Added Module Logging
• Added Better BT Libs
• More... (Forgotten)

• Initial Release

@Skittles9823 @HafizZiq @TheWolfGirl02 @MrCarb0n @ardasuzen @Smiley_18 @boboyute @spleher @AbhishekPaul189 @Drizzy00 @Root69420 @BestFanny