[Bug]: Hi3536 ground station configure seems doesn't work.

[lida2003]

Requirements

• I checked the troubleshooting section in the README to verify that I have the latest Configurator version.
• I did a search to see if there is a similar issue or if a pull request is open.

Current Behavior

It seems OpenIPC Configurator doesn't work with gs hardware, such as Hi3536.

If connect the Hi3536, configurator still think it's a camera, downloading drone configurations, see below log:

2025-02-22 11:55:32.215 +08:00 [VRB] Publishing UI message: Hostname Error!
2025-02-22 11:55:32.215 +08:00 [VRB] Published event AppMessageEvent with payload Message: Hostname Error!, Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: True
2025-02-22 11:55:34.815 +08:00 [VRB] Published event AppMessageEvent with payload Message: , Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: False
2025-02-22 11:55:34.815 +08:00 [VRB] Publishing UI message: Processing Camera...
2025-02-22 11:55:34.816 +08:00 [VRB] Published event AppMessageEvent with payload Message: Processing Camera..., Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: True
2025-02-22 11:55:34.816 +08:00 [DBG] Executing command: 'test -f /etc/wfb.yaml && echo 'true' || echo 'false'' on 192.168.1.15.
2025-02-22 11:55:34.817 +08:00 [DBG] IsWfbYamlEnabled = False
2025-02-22 11:55:34.817 +08:00 [DBG] Reading legacy settings
2025-02-22 11:55:34.817 +08:00 [INF] Downloading file from '/etc/wfb.conf' on 192.168.1.15.
2025-02-22 11:55:34.817 +08:00 [VRB] Publishing UI message: Processing Camera...done
2025-02-22 11:55:34.817 +08:00 [VRB] Published event AppMessageEvent with payload Message: Processing Camera...done, Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: True
2025-02-22 11:55:34.817 +08:00 [VRB] Publishing UI message: Connected
2025-02-22 11:55:34.817 +08:00 [VRB] Published event AppMessageEvent with payload Message: Connected, Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: True
2025-02-22 11:55:35.280 +08:00 [DBG] Command executed successfully. Result: false
, Exit code: 0
2025-02-22 11:55:35.281 +08:00 [DBG] WFB YAML support status: False
2025-02-22 11:55:35.325 +08:00 [INF] File downloaded successfully.
2025-02-22 11:55:35.326 +08:00 [VRB] Published event WfbConfContentUpdatedEvent with payload OpenIPC_Config.Events.WfbConfContentUpdatedMessage
2025-02-22 11:55:35.326 +08:00 [INF] Downloading file from '/etc/majestic.yaml' on 192.168.1.15.
2025-02-22 11:55:35.588 +08:00 [INF] Error downloading file: scp: /etc/majestic.yaml: No such file or directory
2025-02-22 11:55:35.589 +08:00 [DBG] Processing MajesticContentUpdatedMessage.
2025-02-22 11:55:35.590 +08:00 [WRN] ParseYaml called with empty or null content.
2025-02-22 11:55:35.590 +08:00 [VRB] Published event MajesticContentUpdatedEvent with payload OpenIPC_Config.Events.MajesticContentUpdatedMessage
2025-02-22 11:55:35.590 +08:00 [INF] Downloading file from '/etc/telemetry.conf' on 192.168.1.15.
2025-02-22 11:55:35.935 +08:00 [INF] File downloaded successfully.
2025-02-22 11:55:35.938 +08:00 [DBG] Parsing TelemetryContent.
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: unit, value: gs
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: wlan, value: wlan0
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: bandwidth, value: 20
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: stbc, value: 1
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: ldpc, value: 1
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: stream_rx, value: 16
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: stream_tx, value: 144
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: link_id, value: 7669206
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: frame_type, value: data
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: port_rx, value: 14651
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: port_tx, value: 14650
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: fec_k, value: 1
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: fec_n, value: 2
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: pool_timeout, value: 0
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: guard_interval, value: long
2025-02-22 11:55:35.938 +08:00 [DBG] Telemetry - Unknown key: one_way, value: false
2025-02-22 11:55:35.938 +08:00 [VRB] Published event TelemetryContentUpdatedEvent with payload OpenIPC_Config.Events.TelemetryContentUpdatedMessage
2025-02-22 11:55:35.938 +08:00 [INF] Downloading file from '/etc/drone.key' on 192.168.1.15.
2025-02-22 11:55:36.206 +08:00 [ERR] Error downloading file: scp: /etc/drone.key: No such file or directory
2025-02-22 11:55:36.207 +08:00 [VRB] Published event DeviceContentUpdateEvent with payload DeviceConfig: OpenIPC_Config.Models.DeviceConfig, WifiBroadcastContent: , ScreenModeContent: , WfbConfContent: , MajesticContent: , TelemetryContent: 
2025-02-22 11:55:36.207 +08:00 [VRB] Published event AppMessageEvent with payload Message: , Status: , DeviceConfig: OpenIPC_Config.Models.DeviceConfig, CanConnect: True
2025-02-22 11:55:36.207 +08:00 [INF] Done reading files from device.

LOG(just see end of the log, there is an firmware update at the very begining.): configurator20250222.log

Expected Behavior

Configure gs hardware as expected.

Steps To Reproduce

use wfb tab and connect, then it will popup as the snapshot fig as I did.

Environment

• Hi3536: master+badff74, 2025-02-20
• OpenIPC Configurator: 0.5.1

Anything else?

No response

[mikecarr]

Yes that is not supported at this time, there should have been a dialog box saying something to that effect. Should we just not process unsupported configurations?

[lida2003]

Why Hi3536 is not supported?

[mikecarr]

Mainly because I have no idea what that is 😜

…

On Sat, Feb 22, 2025 at 1:21 PM Daniel Li ***@***.***> wrote: Why Hi3536 is not supported? — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJWTPB7ZK64JPXTJJ532RDS63AVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQYDONRYGU> . You are receiving this because you commented.Message ID: ***@***.***> [image: lida2003]*lida2003* left a comment (OpenIPC/companion#85) <#85 (comment)> Why Hi3536 is not supported? — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJWTPB7ZK64JPXTJJ532RDS63AVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQYDONRYGU> . You are receiving this because you commented.Message ID: ***@***.***>

[mikecarr]

Can you compress/scp /etc and /usr/bin folder and attach ?

…

On Sat, Feb 22, 2025 at 1:21 PM Daniel Li ***@***.***> wrote: Why Hi3536 is not supported? — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJWTPB7ZK64JPXTJJ532RDS63AVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQYDONRYGU> . You are receiving this because you commented.Message ID: ***@***.***> [image: lida2003]*lida2003* left a comment (OpenIPC/companion#85) <#85 (comment)> Why Hi3536 is not supported? — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJWTPB7ZK64JPXTJJ532RDS63AVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQYDONRYGU> . You are receiving this because you commented.Message ID: ***@***.***>

[lida2003]

@mikecarr Tar files ziped. usr_bin_etc_backup.zip

Current, msposd ground station mode is not integrated. But it works on my jetson-fpv and we have provide a PR #1715, not accepted yet..

EDIT: BTW, I can do the test if you have a debug version.

[mikecarr]

Thank you, I will create a VM with these files and see what is different from other GS. Because the Radxa GS image was in a state of change I had not focused a lot on that yet. There is also a lot of discussion going on on how we can make provisioning and binding A LOT easier.

[mikecarr]

Thanks for the files, just as I suspected thus uses vdec. I was working adding support for that but was pulled for something else. I will see where I left off with that.

…

On Sat, Feb 22, 2025 at 4:10 PM Daniel Li ***@***.***> wrote: @mikecarr <https://github.com/mikecarr> Tar files ziped. usr_bin_etc_backup.zip <https://github.com/user-attachments/files/18926477/usr_bin_backup.zip> Current, msposd ground station mode <OpenIPC/firmware#1715> is not integrated. But it works on my jetson-fpv. — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJQILYGR5FWLPOYYJBD2REGZDAVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQ3DCMRSHE> . You are receiving this because you were mentioned.Message ID: ***@***.***> [image: lida2003]*lida2003* left a comment (OpenIPC/companion#85) <#85 (comment)> @mikecarr <https://github.com/mikecarr> Tar files ziped. usr_bin_etc_backup.zip <https://github.com/user-attachments/files/18926477/usr_bin_backup.zip> Current, msposd ground station mode <OpenIPC/firmware#1715> is not integrated. But it works on my jetson-fpv. — Reply to this email directly, view it on GitHub <#85 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAPBBJQILYGR5FWLPOYYJBD2REGZDAVCNFSM6AAAAABXURTPACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNZWGQ3DCMRSHE> . You are receiving this because you were mentioned.Message ID: ***@***.***>