This is a personal homelab project utilizing two Raspberry Pi 4B devices ( Homer and Marge), both running Debian Bullseye. The infrastructure is mostly managed with Puppet, automating the setup and configuration of services.

• Homer: A media streaming and monitoring server with Emby, Transmission for torrenting, and Grafana for performance monitoring using Prometheus and Node Exporter.
• Marge: A Network-Attached Storage (NAS) solution with Samba for file sharing, Pihole + Unbound for ad-blocking, and Tailscale for secure remote access.
  • RAID 5 Array: Powered by four SATA HDDs, managed via a Raxda Rock Pi SATA HAT.

# mdadm --create --verbose /dev/md0 \
    --level=5 \
    --raid-devices=4 \
    /dev/sda /dev/sdb /dev/sdc /dev/sdd
# watch cat /proc/mdstat
# mkfs.ext4 /dev/md0
# mdadm --detail /dev/md0

# mdadm --assemble --scan --verbose
# mdadm --detail --scan | tee /etc/mdadm.conf
# update-initramfs -u
# mdadm --detail /dev/md0

⚠️ Do not apply this code without understanding what it does. It is intended for personal use and may not be suitable for your environment.

# wget https://raw.githubusercontent.com/AntonVanAssche/puppetcode/refs/heads/master/bin/puppetcode.sh
# chmod +x puppetcode.sh
# ./puppetcode.sh -i

This will install Puppet, necessary dependencies, and the deb package of this repo.