ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

cores/esp32/esp32-hal-hosted.c

@@ -49,7 +49,10 @@ static sdio_pin_config_t sdio_pin_config = {
 static bool hostedInit() {
   if (!hosted_initialized) {
     log_i("Initializing ESP-Hosted");
-    log_d("SDIO pins: clk=%d, cmd=%d, d0=%d, d1=%d, d2=%d, d3=%d, rst=%d", sdio_pin_config.pin_clk, sdio_pin_config.pin_cmd, sdio_pin_config.pin_d0, sdio_pin_config.pin_d1, sdio_pin_config.pin_d2, sdio_pin_config.pin_d3, sdio_pin_config.pin_reset);
+    log_d(
+      "SDIO pins: clk=%d, cmd=%d, d0=%d, d1=%d, d2=%d, d3=%d, rst=%d", sdio_pin_config.pin_clk, sdio_pin_config.pin_cmd, sdio_pin_config.pin_d0,
+      sdio_pin_config.pin_d1, sdio_pin_config.pin_d2, sdio_pin_config.pin_d3, sdio_pin_config.pin_reset
+    );
     hosted_initialized = true;
     struct esp_hosted_sdio_config conf = INIT_DEFAULT_HOST_SDIO_CONFIG();
     conf.pin_clk.pin = sdio_pin_config.pin_clk;
@@ -140,7 +143,10 @@ bool hostedSetPins(int8_t clk, int8_t cmd, int8_t d0, int8_t d1, int8_t d2, int8
     int8_t current_clk, current_cmd, current_d0, current_d1, current_d2, current_d3, current_rst;
     hostedGetPins(&current_clk, &current_cmd, &current_d0, &current_d1, &current_d2, &current_d3, &current_rst);
     log_e("SDIO pins must be set before ESP-Hosted is initialized");
-    log_e("Current pins used: clk=%d, cmd=%d, d0=%d, d1=%d, d2=%d, d3=%d, rst=%d", current_clk, current_cmd, current_d0, current_d1, current_d2, current_d3, current_rst);
+    log_e(
+      "Current pins used: clk=%d, cmd=%d, d0=%d, d1=%d, d2=%d, d3=%d, rst=%d", current_clk, current_cmd, current_d0, current_d1, current_d2, current_d3,
+      current_rst
+    );
     return false;
   }
 

libraries/BLE/src/BLEDevice.cpp

@@ -472,7 +472,7 @@ int BLEDevice::getPower(esp_ble_power_type_t powerType) {
   }
 #else
   log_w("getPower not supported with hosted HCI - power controlled by co-processor");
-  return 0; // Return default power level
+  return 0;  // Return default power level
 #endif
 }  // getPower
 

libraries/BLE/src/BLEDevice.h

@@ -31,7 +31,7 @@
 typedef int esp_power_level_t;
 typedef int esp_ble_power_type_t;
 #define ESP_BLE_PWR_TYPE_DEFAULT 0
-#define ESP_PWR_LVL_N12 0
+#define ESP_PWR_LVL_N12          0
 #endif
 
 #include "WString.h"

libraries/BLE/src/BLEEddystoneURL.cpp

@@ -175,21 +175,21 @@ void BLEEddystoneURL::setUUID(BLEUUID l_uuid) {
 
 void BLEEddystoneURL::setPower(esp_power_level_t advertisedTxPower) {
   int tx_power = 0;
-  #if SOC_BLE_SUPPORTED
+#if SOC_BLE_SUPPORTED
   switch (advertisedTxPower) {
-    case ESP_PWR_LVL_N12:  tx_power = -12; break;
-    case ESP_PWR_LVL_N9:   tx_power = -9;  break;
-    case ESP_PWR_LVL_N6:   tx_power = -6;  break;
-    case ESP_PWR_LVL_N3:   tx_power = -3;  break;
-    case ESP_PWR_LVL_N0:   tx_power = 0;   break;
-    case ESP_PWR_LVL_P3:   tx_power = +3;  break;
-    case ESP_PWR_LVL_P6:   tx_power = +6;  break;
-    case ESP_PWR_LVL_P9:   tx_power = +9;  break;
-    default:               tx_power = 0;   break;
+    case ESP_PWR_LVL_N12: tx_power = -12; break;
+    case ESP_PWR_LVL_N9:  tx_power = -9; break;
+    case ESP_PWR_LVL_N6:  tx_power = -6; break;
+    case ESP_PWR_LVL_N3:  tx_power = -3; break;
+    case ESP_PWR_LVL_N0:  tx_power = 0; break;
+    case ESP_PWR_LVL_P3:  tx_power = +3; break;
+    case ESP_PWR_LVL_P6:  tx_power = +6; break;
+    case ESP_PWR_LVL_P9:  tx_power = +9; break;
+    default:              tx_power = 0; break;
   }
-  #else
+#else
   log_w("setPower not supported with hosted HCI - power controlled by co-processor");
-  #endif
+#endif
   m_eddystoneData.advertisedTxPower = int8_t((tx_power - -100) / 2);
 }  // setPower
 

libraries/BLE/src/BLESecurity.h

@@ -215,7 +215,7 @@ class BLESecurityCallbacks {
 
 };  // BLESecurityCallbacks
 
-#endif  /* CONFIG_BLUEDROID_ENABLED || CONFIG_NIMBLE_ENABLED */
-#endif  /* SOC_BLE_SUPPORTED || CONFIG_ESP_HOSTED_ENABLE_BT_NIMBLE */
+#endif /* CONFIG_BLUEDROID_ENABLED || CONFIG_NIMBLE_ENABLED */
+#endif /* SOC_BLE_SUPPORTED || CONFIG_ESP_HOSTED_ENABLE_BT_NIMBLE */
 
 #endif  // COMPONENTS_CPP_UTILS_BLESECURITY_H_