</term>
<listitem>
<para>
- Causes each action executed by autovacuum to be logged if it ran for at
+ Causes vacuum action executed by autovacuum to be logged if it ran for at
least the specified amount of time. Setting this to zero logs
- all autovacuum actions. <literal>-1</literal> disables logging autovacuum
- actions. If this value is specified without units, it is taken as milliseconds.
- For example, if you set this to
- <literal>250ms</literal> then all automatic vacuums and analyzes that run
+ all vacuum actions by autovacuum. <literal>-1</literal> disables logging
+ vacuum actions by autovacuum. If this value is specified without units,
+ it is taken as milliseconds. For example, if you set this to
+ <literal>250ms</literal> then all automatic vacuums that run
250ms or longer will be logged. In addition, when this parameter is
set to any value other than <literal>-1</literal>, a message will be
- logged if an autovacuum action is skipped due to a conflicting lock or a
+ logged if a vacuum action by autovacuum is skipped due to a conflicting lock or a
concurrently dropped relation. The default is <literal>10min</literal>.
- Enabling this parameter can be helpful in tracking autovacuum activity.
+ Enabling this parameter can be helpful in tracking vacuum activity by autovacuum.
+ This parameter can only be set in the <filename>postgresql.conf</filename>
+ file or on the server command line; but the setting can be overridden for
+ individual tables by changing table storage parameters.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="guc-log-autoanalyze-min-duration" xreflabel="log_autoanalyze_min_duration">
+ <term><varname>log_autoanalyze_min_duration</varname> (<type>integer</type>)
+ <indexterm>
+ <primary><varname>log_autoanalyze_min_duration</varname></primary>
+ <secondary>configuration parameter</secondary>
+ </indexterm>
+ </term>
+ <listitem>
+ <para>
+ Causes analyze action executed by autovacuum to be logged if it ran for at
+ least the specified amount of time. Setting this to zero logs
+ all analyze actions by autovacuum. <literal>-1</literal> disables logging
+ analyze actions by autovacuum. If this value is specified without units,
+ it is taken as milliseconds. For example, if you set this to
+ <literal>250ms</literal> then all automatic analyzes that run
+ 250ms or longer will be logged. In addition, when this parameter is
+ set to any value other than <literal>-1</literal>, a message will be
+ logged if an analyze action by autovacuum is skipped due to a conflicting lock or a
+ concurrently dropped relation. The default is <literal>10min</literal>.
+ Enabling this parameter can be helpful in tracking analyze activity by autovacuum.
This parameter can only be set in the <filename>postgresql.conf</filename>
file or on the server command line; but the setting can be overridden for
individual tables by changing table storage parameters.
the next database will be processed as soon as the first worker finishes.
Each worker process will check each table within its database and
execute <command>VACUUM</command> and/or <command>ANALYZE</command> as needed.
- <xref linkend="guc-log-autovacuum-min-duration"/> can be set to monitor
+ <xref linkend="guc-log-autovacuum-min-duration"/> and
+ <xref linkend="guc-log-autoanalyze-min-duration"/> can be set to monitor
autovacuum workers' activity.
</para>
</listitem>
</varlistentry>
+ <varlistentry id="reloption-log-autoanalyze-min-duration" xreflabel="log_autoanalyze_min_duration">
+ <term><literal>log_autoanalyze_min_duration</literal> (<type>integer</type>)
+ <indexterm>
+ <primary><varname>log_autoanalyze_min_duration</varname></primary>
+ <secondary>storage parameter</secondary>
+ </indexterm>
+ </term>
+ <listitem>
+ <para>
+ Per-table value for <xref linkend="guc-log-autoanalyze-min-duration"/>
+ parameter.
+ </para>
+ </listitem>
+ </varlistentry>
+
<varlistentry id="reloption-vacuum-max-eager-freeze-failure-rate" xreflabel="vacuum_max_eager_freeze_failure_rate">
<term><literal>vacuum_max_eager_freeze_failure_rate</literal>, <literal>toast.vacuum_max_eager_freeze_failure_rate</literal> (<type>floating point</type>)
<indexterm>
{
{
"log_autovacuum_min_duration",
- "Sets the minimum execution time above which autovacuum actions will be logged",
+ "Sets the minimum execution time above which vacuum actions by autovacuum will be logged",
RELOPT_KIND_HEAP | RELOPT_KIND_TOAST,
ShareUpdateExclusiveLock
},
-1, -1, INT_MAX
},
+ {
+ {
+ "log_autoanalyze_min_duration",
+ "Sets the minimum execution time above which analyze actions by autovacuum will be logged",
+ RELOPT_KIND_HEAP,
+ ShareUpdateExclusiveLock
+ },
+ -1, -1, INT_MAX
+ },
{
{
"toast_tuple_target",
{"autovacuum_multixact_freeze_table_age", RELOPT_TYPE_INT,
offsetof(StdRdOptions, autovacuum) + offsetof(AutoVacOpts, multixact_freeze_table_age)},
{"log_autovacuum_min_duration", RELOPT_TYPE_INT,
- offsetof(StdRdOptions, autovacuum) + offsetof(AutoVacOpts, log_min_duration)},
+ offsetof(StdRdOptions, autovacuum) + offsetof(AutoVacOpts, log_vacuum_min_duration)},
+ {"log_autoanalyze_min_duration", RELOPT_TYPE_INT,
+ offsetof(StdRdOptions, autovacuum) + offsetof(AutoVacOpts, log_analyze_min_duration)},
{"toast_tuple_target", RELOPT_TYPE_INT,
offsetof(StdRdOptions, toast_tuple_target)},
{"autovacuum_vacuum_cost_delay", RELOPT_TYPE_REAL,
verbose = (params.options & VACOPT_VERBOSE) != 0;
instrument = (verbose || (AmAutoVacuumWorkerProcess() &&
- params.log_min_duration >= 0));
+ params.log_vacuum_min_duration >= 0));
if (instrument)
{
pg_rusage_init(&ru0);
{
TimestampTz endtime = GetCurrentTimestamp();
- if (verbose || params.log_min_duration == 0 ||
+ if (verbose || params.log_vacuum_min_duration == 0 ||
TimestampDifferenceExceeds(starttime, endtime,
- params.log_min_duration))
+ params.log_vacuum_min_duration))
{
long secs_dur;
int usecs_dur;
* Make sure to generate only logs for ANALYZE in this case.
*/
onerel = vacuum_open_relation(relid, relation, params.options & ~(VACOPT_VACUUM),
- params.log_min_duration >= 0,
+ params.log_analyze_min_duration >= 0,
ShareUpdateExclusiveLock);
/* leave if relation could not be opened or locked */
verbose = (params.options & VACOPT_VERBOSE) != 0;
instrument = (verbose || (AmAutoVacuumWorkerProcess() &&
- params.log_min_duration >= 0));
+ params.log_analyze_min_duration >= 0));
if (inh)
ereport(elevel,
(errmsg("analyzing \"%s.%s\" inheritance tree",
{
TimestampTz endtime = GetCurrentTimestamp();
- if (verbose || params.log_min_duration == 0 ||
+ if (verbose || params.log_analyze_min_duration == 0 ||
TimestampDifferenceExceeds(starttime, endtime,
- params.log_min_duration))
+ params.log_analyze_min_duration))
{
long delay_in_ms;
WalUsage walusage;
/* user-invoked vacuum is never "for wraparound" */
params.is_wraparound = false;
- /* user-invoked vacuum uses VACOPT_VERBOSE instead of log_min_duration */
- params.log_min_duration = -1;
+ /*
+ * user-invoked vacuum uses VACOPT_VERBOSE instead of
+ * log_vacuum_min_duration and log_analyze_min_duration
+ */
+ params.log_vacuum_min_duration = -1;
+ params.log_analyze_min_duration = -1;
/*
* Later, in vacuum_rel(), we check if a reloption override was specified.
/* open the relation and get the appropriate lock on it */
rel = vacuum_open_relation(relid, relation, params.options,
- params.log_min_duration >= 0, lmode);
+ params.log_vacuum_min_duration >= 0, lmode);
/* leave if relation could not be opened or locked */
if (!rel)
int autovacuum_vac_cost_limit;
int Log_autovacuum_min_duration = 600000;
+int Log_autoanalyze_min_duration = 600000;
/* the minimum allowed time between two awakenings of the launcher */
#define MIN_AUTOVAC_SLEEPTIME 100.0 /* milliseconds */
int freeze_table_age;
int multixact_freeze_min_age;
int multixact_freeze_table_age;
- int log_min_duration;
+ int log_vacuum_min_duration;
+ int log_analyze_min_duration;
/*
* Calculate the vacuum cost parameters and the freeze ages. If there
*/
/* -1 in autovac setting means use log_autovacuum_min_duration */
- log_min_duration = (avopts && avopts->log_min_duration >= 0)
- ? avopts->log_min_duration
+ log_vacuum_min_duration = (avopts && avopts->log_vacuum_min_duration >= 0)
+ ? avopts->log_vacuum_min_duration
: Log_autovacuum_min_duration;
+ /* -1 in autovac setting means use log_autoanalyze_min_duration */
+ log_analyze_min_duration = (avopts && avopts->log_analyze_min_duration >= 0)
+ ? avopts->log_analyze_min_duration
+ : Log_autoanalyze_min_duration;
+
/* these do not have autovacuum-specific settings */
freeze_min_age = (avopts && avopts->freeze_min_age >= 0)
? avopts->freeze_min_age
tab->at_params.multixact_freeze_min_age = multixact_freeze_min_age;
tab->at_params.multixact_freeze_table_age = multixact_freeze_table_age;
tab->at_params.is_wraparound = wraparound;
- tab->at_params.log_min_duration = log_min_duration;
+ tab->at_params.log_vacuum_min_duration = log_vacuum_min_duration;
+ tab->at_params.log_analyze_min_duration = log_analyze_min_duration;
tab->at_params.toast_parent = InvalidOid;
/*
},
{ name => 'log_autovacuum_min_duration', type => 'int', context => 'PGC_SIGHUP', group => 'LOGGING_WHAT',
- short_desc => 'Sets the minimum execution time above which autovacuum actions will be logged.',
- long_desc => '-1 disables logging autovacuum actions. 0 means log all autovacuum actions.',
+ short_desc => 'Sets the minimum execution time above which vacuum actions by autovacuum will be logged.',
+ long_desc => '-1 disables logging vacuum actions by autovacuum. 0 means log all vacuum actions by autovacuum.',
flags => 'GUC_UNIT_MS',
variable => 'Log_autovacuum_min_duration',
boot_val => '600000',
max => 'INT_MAX',
},
+{ name => 'log_autoanalyze_min_duration', type => 'int', context => 'PGC_SIGHUP', group => 'LOGGING_WHAT',
+ short_desc => 'Sets the minimum execution time above which analyze actions by autovacuum will be logged.',
+ long_desc => '-1 disables logging analyze actions by autovacuum. 0 means log all analyze actions by autovacuum.',
+ flags => 'GUC_UNIT_MS',
+ variable => 'Log_autoanalyze_min_duration',
+ boot_val => '600000',
+ min => '-1',
+ max => 'INT_MAX',
+},
+
{ name => 'log_parameter_max_length', type => 'int', context => 'PGC_SUSET', group => 'LOGGING_WHAT',
short_desc => 'Sets the maximum length in bytes of data logged for bind parameter values when logging statements.',
long_desc => '-1 means log values in full.',
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
-#log_autovacuum_min_duration = 10min # log autovacuum activity;
+#log_autovacuum_min_duration = 10min # log vacuum activity by autovacuum;
+ # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+#log_autoanalyze_min_duration = 10min # log analyze activity by autovacuum;
# -1 disables, 0 logs all actions and
# their durations, > 0 logs only
# actions running at least this number
"autovacuum_vacuum_threshold",
"fillfactor",
"log_autovacuum_min_duration",
+ "log_autoanalyze_min_duration",
"parallel_workers",
"toast.autovacuum_enabled",
"toast.autovacuum_freeze_max_age",
int multixact_freeze_table_age; /* multixact age at which to scan
* whole table */
bool is_wraparound; /* force a for-wraparound vacuum */
- int log_min_duration; /* minimum execution threshold in ms at
- * which autovacuum is logged, -1 to use
- * default */
+ int log_vacuum_min_duration; /* minimum execution threshold in
+ * ms at which vacuum by
+ * autovacuum is logged, -1 to use
+ * default */
+ int log_analyze_min_duration; /* minimum execution threshold in
+ * ms at which analyze by
+ * autovacuum is logged, -1 to use
+ * default */
VacOptValue index_cleanup; /* Do index vacuum and cleanup */
VacOptValue truncate; /* Truncate empty pages at the end */
Oid toast_parent; /* for privilege checks when recursing */
extern PGDLLIMPORT int AutovacuumLauncherPid;
extern PGDLLIMPORT int Log_autovacuum_min_duration;
+extern PGDLLIMPORT int Log_autoanalyze_min_duration;
/* Status inquiry functions */
extern bool AutoVacuumingActive(void);
int multixact_freeze_min_age;
int multixact_freeze_max_age;
int multixact_freeze_table_age;
- int log_min_duration;
+ int log_vacuum_min_duration;
+ int log_analyze_min_duration;
float8 vacuum_cost_delay;
float8 vacuum_scale_factor;
float8 vacuum_ins_scale_factor;
fputs("\n# Configuration added by pg_regress\n\n", pg_conf);
fputs("log_autovacuum_min_duration = 0\n", pg_conf);
+ fputs("log_autoanalyze_min_duration = 0\n", pg_conf);
fputs("log_checkpoints = on\n", pg_conf);
fputs("log_line_prefix = '%m %b[%p] %q%a '\n", pg_conf);
fputs("log_lock_waits = on\n", pg_conf);
# Settings that make logs more useful
log_autovacuum_min_duration = 0
+log_autoanalyze_min_duration = 0
log_checkpoints = true
log_connections = all
log_disconnections = true