#include "postgres.h"
#include "access/multixact.h"
+#include "access/multixact_internal.h"
#include "access/slru.h"
#include "access/twophase.h"
#include "access/twophase_rmgr.h"
#include "utils/memutils.h"
-/*
- * Defines for MultiXactOffset page sizes. A page is the same BLCKSZ as is
- * used everywhere else in Postgres.
- *
- * Note: because MultiXactOffsets are 32 bits and wrap around at 0xFFFFFFFF,
- * MultiXact page numbering also wraps around at
- * 0xFFFFFFFF/MULTIXACT_OFFSETS_PER_PAGE, and segment numbering at
- * 0xFFFFFFFF/MULTIXACT_OFFSETS_PER_PAGE/SLRU_PAGES_PER_SEGMENT. We need
- * take no explicit notice of that fact in this module, except when comparing
- * segment and page numbers in TruncateMultiXact (see
- * MultiXactOffsetPagePrecedes).
- */
-
-/* We need four bytes per offset */
-#define MULTIXACT_OFFSETS_PER_PAGE (BLCKSZ / sizeof(MultiXactOffset))
-
-static inline int64
-MultiXactIdToOffsetPage(MultiXactId multi)
-{
- return multi / MULTIXACT_OFFSETS_PER_PAGE;
-}
-
-static inline int
-MultiXactIdToOffsetEntry(MultiXactId multi)
-{
- return multi % MULTIXACT_OFFSETS_PER_PAGE;
-}
-
-static inline int64
-MultiXactIdToOffsetSegment(MultiXactId multi)
-{
- return MultiXactIdToOffsetPage(multi) / SLRU_PAGES_PER_SEGMENT;
-}
-
-/*
- * The situation for members is a bit more complex: we store one byte of
- * additional flag bits for each TransactionId. To do this without getting
- * into alignment issues, we store four bytes of flags, and then the
- * corresponding 4 Xids. Each such 5-word (20-byte) set we call a "group", and
- * are stored as a whole in pages. Thus, with 8kB BLCKSZ, we keep 409 groups
- * per page. This wastes 12 bytes per page, but that's OK -- simplicity (and
- * performance) trumps space efficiency here.
- *
- * Note that the "offset" macros work with byte offset, not array indexes, so
- * arithmetic must be done using "char *" pointers.
- */
-/* We need eight bits per xact, so one xact fits in a byte */
-#define MXACT_MEMBER_BITS_PER_XACT 8
-#define MXACT_MEMBER_FLAGS_PER_BYTE 1
-#define MXACT_MEMBER_XACT_BITMASK ((1 << MXACT_MEMBER_BITS_PER_XACT) - 1)
-
-/* how many full bytes of flags are there in a group? */
-#define MULTIXACT_FLAGBYTES_PER_GROUP 4
-#define MULTIXACT_MEMBERS_PER_MEMBERGROUP \
- (MULTIXACT_FLAGBYTES_PER_GROUP * MXACT_MEMBER_FLAGS_PER_BYTE)
-/* size in bytes of a complete group */
-#define MULTIXACT_MEMBERGROUP_SIZE \
- (sizeof(TransactionId) * MULTIXACT_MEMBERS_PER_MEMBERGROUP + MULTIXACT_FLAGBYTES_PER_GROUP)
-#define MULTIXACT_MEMBERGROUPS_PER_PAGE (BLCKSZ / MULTIXACT_MEMBERGROUP_SIZE)
-#define MULTIXACT_MEMBERS_PER_PAGE \
- (MULTIXACT_MEMBERGROUPS_PER_PAGE * MULTIXACT_MEMBERS_PER_MEMBERGROUP)
-
-/*
- * Because the number of items per page is not a divisor of the last item
- * number (member 0xFFFFFFFF), the last segment does not use the maximum number
- * of pages, and moreover the last used page therein does not use the same
- * number of items as previous pages. (Another way to say it is that the
- * 0xFFFFFFFF member is somewhere in the middle of the last page, so the page
- * has some empty space after that item.)
- *
- * This constant is the number of members in the last page of the last segment.
- */
-#define MAX_MEMBERS_IN_LAST_MEMBERS_PAGE \
- ((uint32) ((0xFFFFFFFF % MULTIXACT_MEMBERS_PER_PAGE) + 1))
-
-/* page in which a member is to be found */
-static inline int64
-MXOffsetToMemberPage(MultiXactOffset offset)
-{
- return offset / MULTIXACT_MEMBERS_PER_PAGE;
-}
-
-static inline int64
-MXOffsetToMemberSegment(MultiXactOffset offset)
-{
- return MXOffsetToMemberPage(offset) / SLRU_PAGES_PER_SEGMENT;
-}
-
-/* Location (byte offset within page) of flag word for a given member */
-static inline int
-MXOffsetToFlagsOffset(MultiXactOffset offset)
-{
- MultiXactOffset group = offset / MULTIXACT_MEMBERS_PER_MEMBERGROUP;
- int grouponpg = group % MULTIXACT_MEMBERGROUPS_PER_PAGE;
- int byteoff = grouponpg * MULTIXACT_MEMBERGROUP_SIZE;
-
- return byteoff;
-}
-
-static inline int
-MXOffsetToFlagsBitShift(MultiXactOffset offset)
-{
- int member_in_group = offset % MULTIXACT_MEMBERS_PER_MEMBERGROUP;
- int bshift = member_in_group * MXACT_MEMBER_BITS_PER_XACT;
-
- return bshift;
-}
-
-/* Location (byte offset within page) of TransactionId of given member */
-static inline int
-MXOffsetToMemberOffset(MultiXactOffset offset)
-{
- int member_in_group = offset % MULTIXACT_MEMBERS_PER_MEMBERGROUP;
-
- return MXOffsetToFlagsOffset(offset) +
- MULTIXACT_FLAGBYTES_PER_GROUP +
- member_in_group * sizeof(TransactionId);
-}
-
/* Multixact members wraparound thresholds. */
#define MULTIXACT_MEMBER_SAFE_THRESHOLD (MaxMultiXactOffset / 2)
#define MULTIXACT_MEMBER_DANGER_THRESHOLD \
--- /dev/null
+/*
+ * multixact_internal.h
+ *
+ * PostgreSQL multi-transaction-log manager internal declarations
+ *
+ * These functions and definitions are for dealing with pg_multixact SLRU
+ * pages. They are internal to multixact.c, but they are exported here to
+ * allow pg_upgrade to write pg_multixact files directly.
+ *
+ * Portions Copyright (c) 1996-2025, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/multixact_internal.h
+ */
+#ifndef MULTIXACT_INTERNAL_H
+#define MULTIXACT_INTERNAL_H
+
+#include "access/multixact.h"
+
+
+/*
+ * Defines for MultiXactOffset page sizes. A page is the same BLCKSZ as is
+ * used everywhere else in Postgres.
+ *
+ * Note: because MultiXactOffsets are 32 bits and wrap around at 0xFFFFFFFF,
+ * MultiXact page numbering also wraps around at
+ * 0xFFFFFFFF/MULTIXACT_OFFSETS_PER_PAGE, and segment numbering at
+ * 0xFFFFFFFF/MULTIXACT_OFFSETS_PER_PAGE/SLRU_PAGES_PER_SEGMENT. We need
+ * take no explicit notice of that fact in this module, except when comparing
+ * segment and page numbers in TruncateMultiXact (see
+ * MultiXactOffsetPagePrecedes).
+ */
+
+/* We need four bytes per offset */
+#define MULTIXACT_OFFSETS_PER_PAGE (BLCKSZ / sizeof(MultiXactOffset))
+
+static inline int64
+MultiXactIdToOffsetPage(MultiXactId multi)
+{
+ return multi / MULTIXACT_OFFSETS_PER_PAGE;
+}
+
+static inline int
+MultiXactIdToOffsetEntry(MultiXactId multi)
+{
+ return multi % MULTIXACT_OFFSETS_PER_PAGE;
+}
+
+static inline int64
+MultiXactIdToOffsetSegment(MultiXactId multi)
+{
+ return MultiXactIdToOffsetPage(multi) / SLRU_PAGES_PER_SEGMENT;
+}
+
+/*
+ * The situation for members is a bit more complex: we store one byte of
+ * additional flag bits for each TransactionId. To do this without getting
+ * into alignment issues, we store four bytes of flags, and then the
+ * corresponding 4 Xids. Each such 5-word (20-byte) set we call a "group", and
+ * are stored as a whole in pages. Thus, with 8kB BLCKSZ, we keep 409 groups
+ * per page. This wastes 12 bytes per page, but that's OK -- simplicity (and
+ * performance) trumps space efficiency here.
+ *
+ * Note that the "offset" macros work with byte offset, not array indexes, so
+ * arithmetic must be done using "char *" pointers.
+ */
+/* We need eight bits per xact, so one xact fits in a byte */
+#define MXACT_MEMBER_BITS_PER_XACT 8
+#define MXACT_MEMBER_FLAGS_PER_BYTE 1
+#define MXACT_MEMBER_XACT_BITMASK ((1 << MXACT_MEMBER_BITS_PER_XACT) - 1)
+
+/* how many full bytes of flags are there in a group? */
+#define MULTIXACT_FLAGBYTES_PER_GROUP 4
+#define MULTIXACT_MEMBERS_PER_MEMBERGROUP \
+ (MULTIXACT_FLAGBYTES_PER_GROUP * MXACT_MEMBER_FLAGS_PER_BYTE)
+/* size in bytes of a complete group */
+#define MULTIXACT_MEMBERGROUP_SIZE \
+ (sizeof(TransactionId) * MULTIXACT_MEMBERS_PER_MEMBERGROUP + MULTIXACT_FLAGBYTES_PER_GROUP)
+#define MULTIXACT_MEMBERGROUPS_PER_PAGE (BLCKSZ / MULTIXACT_MEMBERGROUP_SIZE)
+#define MULTIXACT_MEMBERS_PER_PAGE \
+ (MULTIXACT_MEMBERGROUPS_PER_PAGE * MULTIXACT_MEMBERS_PER_MEMBERGROUP)
+
+/*
+ * Because the number of items per page is not a divisor of the last item
+ * number (member 0xFFFFFFFF), the last segment does not use the maximum number
+ * of pages, and moreover the last used page therein does not use the same
+ * number of items as previous pages. (Another way to say it is that the
+ * 0xFFFFFFFF member is somewhere in the middle of the last page, so the page
+ * has some empty space after that item.)
+ *
+ * This constant is the number of members in the last page of the last segment.
+ */
+#define MAX_MEMBERS_IN_LAST_MEMBERS_PAGE \
+ ((uint32) ((0xFFFFFFFF % MULTIXACT_MEMBERS_PER_PAGE) + 1))
+
+/* page in which a member is to be found */
+static inline int64
+MXOffsetToMemberPage(MultiXactOffset offset)
+{
+ return offset / MULTIXACT_MEMBERS_PER_PAGE;
+}
+
+static inline int64
+MXOffsetToMemberSegment(MultiXactOffset offset)
+{
+ return MXOffsetToMemberPage(offset) / SLRU_PAGES_PER_SEGMENT;
+}
+
+/* Location (byte offset within page) of flag word for a given member */
+static inline int
+MXOffsetToFlagsOffset(MultiXactOffset offset)
+{
+ MultiXactOffset group = offset / MULTIXACT_MEMBERS_PER_MEMBERGROUP;
+ int grouponpg = group % MULTIXACT_MEMBERGROUPS_PER_PAGE;
+ int byteoff = grouponpg * MULTIXACT_MEMBERGROUP_SIZE;
+
+ return byteoff;
+}
+
+static inline int
+MXOffsetToFlagsBitShift(MultiXactOffset offset)
+{
+ int member_in_group = offset % MULTIXACT_MEMBERS_PER_MEMBERGROUP;
+ int bshift = member_in_group * MXACT_MEMBER_BITS_PER_XACT;
+
+ return bshift;
+}
+
+/* Location (byte offset within page) of TransactionId of given member */
+static inline int
+MXOffsetToMemberOffset(MultiXactOffset offset)
+{
+ int member_in_group = offset % MULTIXACT_MEMBERS_PER_MEMBERGROUP;
+
+ return MXOffsetToFlagsOffset(offset) +
+ MULTIXACT_FLAGBYTES_PER_GROUP +
+ member_in_group * sizeof(TransactionId);
+}
+
+#endif /* MULTIXACT_INTERNAL_H */
projects / postgresql.git / commitdiff