Some additional doc changes based around compression of page images in

WAL and the interaction of the new full_page_writes parameter with PITR.

The too-small WAL first sect1 has been merged with the one following
sect1 for clarity.

Some minor comments have been made in the WAL config section also.

Passes SGML make and proofread for typos.
Files changed:
patching file doc/src/sgml/backup.sgml
patching file doc/src/sgml/config.sgml
patching file doc/src/sgml/wal.sgml

Simon Riggs

diff --git a/doc/src/sgml/backup.sgml b/doc/src/sgml/backup.sgml
index 01cdae83d69f3a6352bf0eaed03ad0000b8adad8..4dbeae9fd66851d6f23a125f2982c8ed183adfc9 100644 (file)
--- a/doc/src/sgml/backup.sgml
+++ b/doc/src/sgml/backup.sgml
@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.69 2005/06/25 22:47:28 tgl Exp $
+$PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.70 2005/10/13 17:32:42 momjian Exp $
 -->
 <chapter id="backup">
  <title>Backup and Restore</title>
@@ -1147,13 +1147,22 @@ restore_command = 'copy /mnt/server/archivedir/%f "%p"'  # Windows
    </para>
 
    <para>
-    It should also be noted that the present <acronym>WAL</acronym>
-    format is extremely bulky since it includes many disk page
-    snapshots.  This is appropriate for crash recovery purposes,
+    It should also be noted that the default <acronym>WAL</acronym>
+    format is fairly bulky since it includes many disk page snapshots. The pages
+    are partially compressed, using the simple expedient of removing the
+    empty space (if any) within each block. You can significantly reduce
+    the total volume of archived logs by turning off page snapshots 
+    using the <xref linkend="guc-full-page-writes"> parameter, 
+    though you should read the notes and warnings in 
+    <xref linkend="reliability"> before you do so. 
+    These page snapshots are designed to allow crash recovery,
     since we may need to fix partially-written disk pages.  It is not
-    necessary to store so many page copies for PITR operations, however.
+    necessary to store these page copies for PITR operations, however.
+    If you turn off <xref linkend="guc-full-page-writes">, your PITR
+    backup and recovery operations will continue to work successfully.
     An area for future development is to compress archived WAL data by
-    removing unnecessary page copies.  In the meantime, administrators
+    removing unnecessary page copies when <xref linkend="guc-full-page-writes">
+    is turned on.  In the meantime, administrators
     may wish to reduce the number of page snapshots included in WAL by
     increasing the checkpoint interval parameters as much as feasible.
    </para>

diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml
index 68557a26d23871e80793433f4aa5160adf57b512..5da06fddce351a420aa46dad56270de608f3f5c3 100644 (file)
--- a/doc/src/sgml/config.sgml
+++ b/doc/src/sgml/config.sgml
@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/config.sgml,v 1.25 2005/10/08 20:27:25 tgl Exp $
+$PostgreSQL: pgsql/doc/src/sgml/config.sgml,v 1.26 2005/10/13 17:32:42 momjian Exp $
 -->
 <chapter Id="runtime-config">
   <title>Run-time Configuration</title>
@@ -1360,7 +1360,7 @@ SET ENABLE_SEQSCAN TO OFF;
        <para>
         When this option is on, the <productname>PostgreSQL</> server
         writes full pages to WAL when they are first modified after a
-        checkpoint so full recovery is possible. Turning this option off
+        checkpoint so crash recovery is possible. Turning this option off
         might lead to a corrupt system after an operating system crash
         or power failure because uncorrected partial pages might contain
         inconsistent or corrupt data. The risks are less but similar to

diff --git a/doc/src/sgml/wal.sgml b/doc/src/sgml/wal.sgml
index 8f96f483622f538334b4665c75c21f0e40b5ebac..62595c594e4fd00fc6d15b7883f1824e98df82fe 100644 (file)
--- a/doc/src/sgml/wal.sgml
+++ b/doc/src/sgml/wal.sgml
@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/wal.sgml,v 1.35 2005/10/01 01:42:43 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/wal.sgml,v 1.36 2005/10/13 17:32:42 momjian Exp $ -->
 
 <chapter id="reliability">
  <title>Reliability</title>
@@ -12,7 +12,7 @@
    failure (unrelated to the non-volatile area itself). To accomplish
    this, <productname>PostgreSQL</> uses the magnetic platters of modern
    disk drives for permanent storage that is immune to the failures
-   listed above. In fact, a computer can be completely destroyed, but if
+   listed above. In fact, even if a computer is fatally damaged, if
    the disk drives survive they can be moved to another computer with
    similar hardware and all committed transactions will remain intact.
   </para>
@@ -68,11 +68,13 @@
    these partially written cases. To guard against that,
    <productname>PostgreSQL</> periodically writes full page images to
    permanent storage <emphasis>before</> modifying the actual page on
-   disk. By doing this, during recovery <productname>PostgreSQL</> can
+   disk. By doing this, during crash recovery <productname>PostgreSQL</> can
    restore partially-written pages. If you have a battery-backed disk
-   controller that prevents partial page writes, you can turn off this
-   page imaging by using the <xref linkend="guc-full-page-writes">
-   parameter.
+   controller or filesystem (e.g. Reiser4) that prevents partial page writes, 
+   you can turn off this page imaging by using the 
+   <xref linkend="guc-full-page-writes"> parameter. This parameter has no 
+   effect on the successful use of Point in Time Recovery (PITR), 
+   described in <xref linkend="backup-online">.
   </para>
  
   <para>
@@ -107,14 +109,10 @@
     the data pages can be redone from the log records.  (This is
     roll-forward recovery, also known as REDO.)
    </para>
-  </sect1>
-
-  <sect1 id="wal-benefits">
-   <title>Benefits of Write-Ahead Logging</title>
 
-   <indexterm zone="wal-benefits">
-    <primary>fsync</primary>
-   </indexterm>
+   <para>
+    WAL brings three major benefits:
+   </para>
 
    <para>
     The first major benefit of using <acronym>WAL</acronym> is a
@@ -131,11 +129,11 @@
    </para>
 
    <para>
-    The next benefit is consistency of the data pages. The truth is
-    that, before <acronym>WAL</acronym>,
+    The next benefit is crash recovery protection. The truth is
+    that, before <acronym>WAL</acronym> was introduced back in release 7.1,
     <productname>PostgreSQL</productname> was never able to guarantee
-    consistency in the case of a crash.  Before
-    <acronym>WAL</acronym>, any crash during writing could result in:
+    consistency in the case of a crash.  Now, 
+    <acronym>WAL</acronym> protects fully against the following problems:
 
     <orderedlist>
      <listitem>
@@ -151,13 +149,6 @@
       of partially written data pages</simpara>
      </listitem>
     </orderedlist>
-
-    Problems with indexes (problems 1 and 2) could possibly have been
-    fixed by additional <function>fsync</function> calls, but it is
-    not obvious how to handle the last case without
-    <acronym>WAL</acronym>.  <acronym>WAL</acronym> saves the entire data
-    page content in the log if that is required to ensure page
-    consistency for after-crash recovery.
    </para>
 
    <para>
@@ -214,12 +205,14 @@
    <varname>checkpoint_timeout</varname> causes checkpoints to be done
    more often. This allows faster after-crash recovery (since less work
    will need to be redone). However, one must balance this against the
-   increased cost of flushing dirty data pages more often. In addition,
-   to ensure data page consistency, the first modification of a data
-   page after each checkpoint results in logging the entire page
-   content. Thus a smaller checkpoint interval increases the volume of
-   output to the WAL log, partially negating the goal of using a smaller
-   interval, and in any case causing more disk I/O.
+   increased cost of flushing dirty data pages more often. If 
+   <xref linkend="guc-full-page-writes"> is set (the default), there is 
+   another factor to consider. To ensure data page consistency, 
+   the first modification of a data page after each checkpoint results in 
+   logging the entire page content. In that case,
+   a smaller checkpoint interval increases the volume of output to the WAL log,
+   partially negating the goal of using a smaller interval, 
+   and in any case causing more disk I/O.
   </para>
 
   <para>
@@ -234,7 +227,9 @@
    a message will be output to the server log recommending increasing 
    <varname>checkpoint_segments</varname>.  Occasional appearance of such
    a message is not cause for alarm, but if it appears often then the
-   checkpoint control parameters should be increased.
+   checkpoint control parameters should be increased. Bulk operations such
+   as a COPY, INSERT SELECT etc. may cause a number of such warnings if you
+   do not set <xref linkend="guc-checkpoint-segments"> high enough.
   </para>
 
   <para>
@@ -252,7 +247,7 @@
   </para>
 
   <para>
-   There are two commonly used <acronym>WAL</acronym> functions:
+   There are two commonly used internal <acronym>WAL</acronym> functions:
    <function>LogInsert</function> and <function>LogFlush</function>.
    <function>LogInsert</function> is used to place a new record into
    the <acronym>WAL</acronym> buffers in shared memory. If there is no
@@ -275,9 +270,11 @@
    modifying the configuration parameter <xref
    linkend="guc-wal-buffers">.  The default number of <acronym>WAL</acronym>
    buffers is 8.  Increasing this value will
-   correspondingly increase shared memory usage.  (It should be noted
-   that there is presently little evidence to suggest that increasing
-   <varname>wal_buffers</> beyond the default is worthwhile.)
+   correspondingly increase shared memory usage.  When 
+   <xref linkend="guc-full-page-writes"> is set and the system is very busy, 
+   setting this value higher will help smooth response times during the 
+   period immediately following each checkpoint.  As a guide, a setting of 1024 
+   would be considered to be high.
   </para>
 
   <para>
@@ -313,7 +310,8 @@
    (provided that <productname>PostgreSQL</productname> has been
    compiled with support for it) will result in each
    <function>LogInsert</function> and <function>LogFlush</function>
-   <acronym>WAL</acronym> call being logged to the server log. This
+   <acronym>WAL</acronym> call being logged to the server log. The output
+   is too verbose for use as a guide to performance tuning. This
    option may be replaced by a more general mechanism in the future.
   </para>
  </sect1>